Sub-Audible Tones, Digital Codes and Privacy Codes Explained
A plain-language guide to the settings that keep other people's conversations out of your speaker — what they do, how they work, and every standard tone and code listed in one place.
When using a walkie talkie or two way radio, you may see settings such as CTCSS, DCS, or Privacy Codes. Many users ask what is CTCSS, what is DCS on a walkie talkie, and what is the difference between CTCSS and DCS.
In simple terms, CTCSS and DCS are features that help reduce unwanted conversations from other users who are using the same radio channel. They do not create additional channels or provide real privacy, but they help make communication clearer and easier to manage.
Basically what it does is this: it adds a tone into your transmission at a certain frequency. Other radios must have the same CTCSS tone set to hear the transmission. A radio with CTCSS enabled will only pass audio for the tone it has set.
The tone sits between 67.0 and 250.3 Hz — below the range of normal speech. It is called a sub-audible tone because your radio filters it out before the audio reaches the speaker, so you never hear it.
Different CTCSS codes have different frequencies, and this is how it filters out other people — as long as they have a different CTCSS, or no CTCSS, then your radio will not pass any audio to the speaker.
These are the 39 standard tones defined by EIA/TIA-603, shown in Hz:
| 67.0 | 69.3 | 71.9 | 74.4 |
| 77.0 | 79.7 | 82.5 | 85.4 |
| 88.5 | 91.5 | 94.8 | 97.4 |
| 100.0 | 103.5 | 107.2 | 110.9 |
| 114.8 | 118.8 | 123.0 | 127.3 |
| 131.8 | 136.5 | 141.3 | 146.2 |
| 151.4 | 156.7 | 162.2 | 167.9 |
| 173.8 | 179.9 | 186.2 | 192.8 |
| 203.5 | 210.7 | 218.1 | 225.7 |
| 233.6 | 241.8 | 250.3 | Hz |
Most walkie talkies list 38 to 50 tones depending on the brand — longer lists add a few older extra values such as 159.8, 199.5, and 254.1 Hz. If your radio shows code numbers instead of frequencies, the numbering is set by the manufacturer, so always match by the value shown on both radios.
It stands for Digital-Coded Squelch. It sends a number repeatedly encoded in digital as you speak, in the low frequencies so you do not hear it. If someone else transmits on the channel with a different or no DCS, the radio will not unmute. If they transmit with the same DCS as you, then your radio will unmute.
DCS is newer than CTCSS, and has more codes. This gives a lower chance of picking the same code as someone else. The code is sent as a small digital stream at about 134 bits per second, riding below the voice audio just like a CTCSS tone.
DCS codes are written as three-digit numbers that use only the digits 0 to 7 — for example 023 or 754. Depending on the brand, you may also see the same feature called DTCS, DPL, or DCG. In most cases these names all refer to the same digital coded squelch technology.
The full standard list contains 104 codes, from 023 to 754:
| 023 | 025 | 026 | 031 | 032 | 036 | 043 | 047 |
| 051 | 053 | 054 | 065 | 071 | 072 | 073 | 074 |
| 114 | 115 | 116 | 122 | 125 | 131 | 132 | 134 |
| 143 | 145 | 152 | 155 | 156 | 162 | 165 | 172 |
| 174 | 205 | 212 | 223 | 225 | 226 | 243 | 244 |
| 245 | 246 | 251 | 252 | 255 | 261 | 263 | 265 |
| 266 | 271 | 274 | 306 | 311 | 315 | 325 | 331 |
| 332 | 343 | 346 | 351 | 356 | 364 | 365 | 371 |
| 411 | 412 | 413 | 423 | 431 | 432 | 445 | 446 |
| 452 | 454 | 455 | 462 | 464 | 465 | 466 | 503 |
| 506 | 516 | 523 | 526 | 532 | 546 | 565 | 606 |
| 612 | 624 | 627 | 631 | 632 | 654 | 662 | 664 |
| 703 | 712 | 723 | 731 | 732 | 734 | 743 | 754 |
Some radios list 83 DCS codes instead of 104 — the smaller list is a subset of this table, and every code works the same way. Always set the same code on every radio in your group.
A common question from radio users is CTCSS vs DCS or DCS vs CTCSS. Both are designed to reduce unwanted transmissions on the same channel, but they work differently.
| Feature | CTCSS | DCS |
|---|---|---|
| Type | Analog tone | Digital code |
| Full name | Continuous Tone Coded Squelch System | Digital-Coded Squelch |
| Signal method | Uses low-frequency tones (67.0–250.3 Hz) | Uses a digital code stream (about 134 bits per second) |
| Available options | Fewer codes (38 to 50 tones on most radios) | More codes (83 or 104 on most radios) |
| Common use | Widely used in analog radios | Popular in modern radio systems |
There is no universal answer to CTCSS vs DCS which is better.
CTCSS is a good choice when compatibility with many analog radios is important
DCS provides more code options and may be useful in areas with many radio users
The most important thing is that all radios use the same channel and the same CTCSS tone or DCS code. A radio set to a CTCSS tone and a radio set to a DCS code will not hear each other.
Retevis calls both of these features "Privacy Codes".
Privacy Codes are not extra channels. They allow multiple users to share the same channel while reducing unwanted conversations or cross talk. Even when using the same frequency, your radio will only open the speaker for transmissions using the same CTCSS tone or DCS code.
However, CTCSS and DCS are not encryption. They do not make communication private or secure. They only filter unwanted audio from other users.
Everyone must match. Same channel, same tone or code — on every radio in the group.
Turned off means hear everything. A radio with CTCSS and DCS off will pick up every transmission on the channel.
It is a filter, not a lock. Different tones on the same channel can still interfere with each other — the tone or code only keeps your speaker quiet.
CTCSS stands for Continuous Tone Coded Squelch System.
CTCSS on a walkie talkie is an analog tone system that allows the radio speaker to open only when the correct tone is detected.
DCS is a digital coded squelch system that uses digital codes to control when the radio receives audio.
The main difference between CTCSS and DCS is that CTCSS uses analog tones, while DCS uses digital codes.
Yes. Many radios refer to CTCSS and DCS as Privacy Codes, but they only filter transmissions and do not provide true privacy.
No. All users still share the same channel. CTCSS and DCS only decide which transmissions open your speaker.
CTCSS and DCS are important features found in many walkie talkies and two way radios.
CTCSS uses analog tones, while DCS uses digital codes. Both help reduce unwanted transmissions and improve communication efficiency when multiple users share the same radio channel.
When choosing between CTCSS and DCS, the best option depends on your radio system, compatibility needs, and communication environment.
Have questions or suggestions?
Open the app and tap Me → Feedback to reach us. We'll get back to you as soon as possible.